| View NormG's: | home | workshop | projects (0) | blog (0) | reviews (4) | forum topics (3) | buddies (10) | favorites (22) | activity log |  |
Great Bandsaw Blade
After Reading MBS’ review I ordered the same blade. It arrived today while I was at work. Very well packaged and in good shape. After dinner, I went out to the shop and installed on my newer Craftsman 12” 89 1/2” blade (Similar to the Rikon). It is a great saw. After about 15 minutes of setup it was ready to go. Blade is noticeably quieter than the Timber Wolf blades I have been using. I followed the instructions and used a slower rate to break the blade in. The I ...
Great Tool and Even Better Customer Service From Home Depot
Wife purchased an additional smoke detector and Carbon Monoxide Detector today, which required me to get out the drill. I received this as a gift last year after my prior drill of 10 years died. I really do not need much more than this as I really do not have a need. So it meets my needs. It is comfortable to hold and use, the battery life is very good, as is the ability to perform as a drill and driver and general uses as a flap sander, wire wheel distress-er etc . I use it in the sho...
New Tool Purchase
Just this evening I picked up a new DW734. I would post what I paid for it, but you would not believe me. After I get it set up and make some chips I will write a review and by that time I will have taken a picture of my receipt and post it. There was a very large error made, I by happenstance came across it, took advantage of it by placing my order and the price was honored. I am very fortunate of this event and know it. I am also very grateful for this event as I would not have been ab...
Blade alignment issues all of the sudden
I purchased this saw as an upgrade February 2010, at a very good price with the blessings of my wife. I initially had some of the same issues others had with the set up of this TS. My son saw an entry in LJ’s that very helpful and I joined. I changed the bolts, washers, etc. What was the most help was an entry that suggested loosening the 45/90 set screws in front of the blade and everything just fell right into place. The saw was packed well, it did not have damage and/or missin...
