LumberJocks

Nitreug's Blog

  • Advertise with us
This blog is written by Nitreug | 4 entries so far

Latest Entry

Alex's Coffee Table Build Off #4: The finishing line!

11-17-2014 12:05 AM by Nitreug | 2 comments »

In my last entry, I finished by attaching the top as you can see in this picture: Before I attached the top, I roughly cut the end of the leg to size so I then had to blend the top and legs into one table. I used my spokeshave to create round-over where the route couldn’t reach. I used chisels to cut the bulk of the tenon and I then used rasps to blend everything together. Finally, I had to sand the entire table. Thankfully, I had access to a pneumatic sander which is a beast compared to my 5 inch random orbit sander. Finally, it was finishing time. I used watco spray lacquer (in a spray can). I don’t have an HVLP system so the spray cans were an easy alte...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com