LumberJocks

Replacement Speaker Boxes

  • Advertise with us
Blog series by Nighthawk updated 846 days ago 4 parts 8328 reads 3 comments total

Part 1: Speaker Boxes

948 days ago by Nighthawk | 1 comment »

Take two speaker boxes that are worse for wear, and kind of water logged. Then say, “heck they aren’t exactly cheap speakers either. ummmmmmm” Mission speakers. Remove guts of both speakers. Put in plasted container and seal. Turn round and now say… “ummm now what?... followed by a gulp, ”...and he wants two… hmmmm “ Okay we first made a router jig so we can do some nice daedo to fit the speakers into and then finish the cross cut tab...

Read this entry »


Part 2: Clamps are off...

935 days ago by Nighthawk | 0 comments »

Been a bit slack and well christmas and all that no excuse… anyway both speakers now glued and set, the back piece is not yet glued in, so we can assemble the wiring to the actual speakers when finished etc. Clamps are off and the long slow timely process of sanding to get them loooking good. This will also hide any inperfections of our glue up… Doh Have taped newspaper over speaker faces to protect them the best we can, so no dust can get in anyway. Also have done the same to ...

Read this entry »


Part 3: Sanding done

914 days ago by Nighthawk | 1 comment »

Okay finally happy with the sanding of the actual boxes for the speakers and they are now classed as completed to return to the owner for him to do his part. Problem is they don’t look to different from my last blog… but trust me… they are… :-) As the person that I did these for will put the finish coating on, I don’t believe he has decided yet what he is going to do… I thinkk he wants to stain them… haven’t a clue. Final sanding done̷...

Read this entry »


Part 4: Speaker Stands

846 days ago by Nighthawk | 1 comment »

Well yes it has been a while since I did anything. But I thought well I better actually start well finish doing the stands since Robbie has actually plumbed our Dishwasher… kinda was the deal. Anyway this is kinda the idea I have been thinking about for a while. Laminated pine to the rimu and cut. Just needs a good sand. Then the base and the top. I do have to make another top plate as the last one was not quite long enough. Anyway it will be sanded and then glued and screwed. We need ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase