LumberJocks

Nighthawks Ramblings

  • Advertise with us
This blog is written by Nighthawk | 21 entries so far

Latest Entry

Dust Extractor Blast Gate

03-29-2015 08:55 AM by Nighthawk | 0 comments »

http://www.wackywoodworks.co.nz/blastgate.php While this a full PVC blast gate it can be made in the average woodworkers woodshop with ease. But because of this I have simply made a blog post and not a project post etc In the video I am making a PVC blast gate for my home dust extractor system. You can treat PVC like wood, and can cut it on the Table saw, mitre saw, band saw, use the sanding wheels etc. On the thicker pipe we use jigsaws However on the table saw and mitre saw cut slowly else you will get chip out etc. I am using a 100mm SN6 PVC pipe, the housing is made from 3mm sheet PVC. The big hole in the centre of the gate housing was simply drill on the drill press with a h...

Read this entry »

Older Entries

View all 21 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com