LumberJocks

How to Remove Rust From a Tablesaw

  • Advertise with us
Blog entry by NewEnglandsWoodWorks posted 09-29-2012 05:04 PM 4951 reads 1 time favorited 17 comments Add to Favorites Watch

Sorry if you get invalid parameters heres the link if it doesn’t work: http://www.youtube.com/watch?v=9yb9NHLU20I

-- Brett



17 comments so far

View Don Broussard's profile (online now)

Don Broussard

2141 posts in 1002 days


#1 posted 09-29-2012 05:30 PM

When I try to play the video, I get a note “Invalid Parameters”. I don’t know if it’s me or you with a technical issue.

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

View whitebeast88's profile

whitebeast88

3602 posts in 941 days


#2 posted 09-29-2012 05:32 PM

same here.

-- Marty.Athens,AL

View Arlin Eastman's profile

Arlin Eastman

2250 posts in 1312 days


#3 posted 09-29-2012 05:49 PM

samo samo

-- It is always the right time, to do the right thing.

View a1Jim's profile

a1Jim

112933 posts in 2328 days


#4 posted 09-29-2012 06:11 PM

ditto

-- http://artisticwoodstudio.com Custom furniture

View deeman's profile

deeman

374 posts in 1831 days


#5 posted 09-29-2012 07:06 PM

me tooo

-- Dennis Trenton Ohio And life is worth the living just because He lives!

View poopiekat's profile

poopiekat

3735 posts in 2485 days


#6 posted 09-29-2012 07:31 PM

I went to youTube…saw the video. hey, just use sandpaper and be done with it, already!

-- Einstein: "The intuitive mind is a sacred gift, and the rational mind is a faithful servant. We have created a society that honors the servant and has forgotten the gift." I'm Poopiekat!!

View bigike's profile

bigike

4035 posts in 2039 days


#7 posted 09-29-2012 08:03 PM

Same

-- Ike, Big Daddies Woodshop, http://www.icombadaniels@yahoo.com

View Stevinmarin's profile

Stevinmarin

838 posts in 1826 days


#8 posted 09-29-2012 08:07 PM

What’s wrong with all you guys? Just reset your invalid parameters!

Ha….hey Brent: try copying and pasting the embed code from YouTube again. Probably didn’t get it all.

-- Entertainment for mere mortal woodworkers. http://www.WoodworkingForMereMortals.com

View Don Broussard's profile (online now)

Don Broussard

2141 posts in 1002 days


#9 posted 09-29-2012 09:16 PM

Here’s the code to see Brent’s short video: http://www.youtube.com/watch?v=9yb9NHLU20I

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

View NewEnglandsWoodWorks's profile

NewEnglandsWoodWorks

117 posts in 1352 days


#10 posted 09-29-2012 10:00 PM

Sorry all just fixed it.

-- Brett

View nobuckle's profile

nobuckle

1120 posts in 1511 days


#11 posted 09-30-2012 02:09 PM

Thanks for the tip Brent.

-- Doug - Make an effort to live by the slogan "We try harder"

View NormG's profile

NormG

4537 posts in 1754 days


#12 posted 10-01-2012 04:31 AM

It does work

-- Norman

View jackass's profile

jackass

350 posts in 2463 days


#13 posted 10-01-2012 06:39 PM

I put a sheet of emery paper in my quarter sheet sander and sand away. Makes it nice and smooth, then a good coat of car polish and buff it. Shiney and slippery!!! Works well.

Jack

-- Jack Keefe Shediac NB Canada

View Rob Lopez's profile

Rob Lopez

9 posts in 1941 days


#14 posted 10-02-2012 02:12 AM

I was always taught that car polish has silicone which is not recommended. It may cause real issues when it comes to finishing time.

But if i am wrong, wont be the first time….:)

-- Boards, Don't hit back! - Bruce Lee

View jackass's profile

jackass

350 posts in 2463 days


#15 posted 10-02-2012 11:36 AM

Hi Rob,
Have not had any issues with car wax and finishing, a buddy of mine is in the car painting business, and owns a body shop. He says Armourall on the dash, or on the tires, of a car he is going to paint will affect the results, but not car polish. Even though they wash down a car with solvent when they paint.
Jack

-- Jack Keefe Shediac NB Canada

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase