| This blog is written by ND2ELK | 23 entries so far |
-
Don't come across trucks like this too often.
I guess you can consider this a needed tool for a cabinet builder. My step daughters van died and...
-
Meeting a Special Lumberjock
There are some lumberjocks that have been an inspiration to me. They have a God-given talent in ...
-
Haidyn's 6-Drawer Dresser #7
This is the 6 drawer dresser that matches the 4-in-1 crib I made for my granddaughter, Hayden. M...
-
Haidyn's Crib #6 - Toddler Bed, Day Bed, Full Size Bed
This is the different assemblies that can be made out of the 4-in-1 crib. To make the crib int...
-
Haidyn's Crib #5 - Final Assembly
The crib is completely assembled by using connector bolts, cap nuts and cross dowels. I used the...
-
Haidyn's Crib #4, End Assemblies & Top Caps, Bent Moldings & Trim Pieces
The end assemblies are made the same way as the head board assembly. You can refer to the pictur...
-
Haidyn's Crib #3 - Started Head Board Assembly and Front Assembly
I was going to make the curved moldings and trim next but the roller support I ordered for the ba...
-
Haidyn's Crib #2, Curved Molding and Trim Jigs
There are 10 curved pieces needed for this crib. I needed one jig for the end assembly and anoth...
-
Haidyn's Crib #1, The Design Phase
My only daughter is having her first baby due in July. I told her I wanted to build a 4-in-1 cri...
-
Can't Believe I Didn't Buy it Sooner!
I have posted a tool review, but I wanted to show more than 3 pictures and tell you more about th...
-
Let The Fun Begin!
Let the Fun Begin! The new equipment I got is set up, adjusted, hooked into the dust collectio...
-
I Am Back
Hi Guys & Gals I have not been looking much at the LJ site for the last month and a half b...
-
Birthday Boy Today
I turned 62 today! Now I can get back some of what I payed in all these years. We don’t nee...
-
Makita 4.2 Gal MAC 2400 Oiled Twin Hot Dog Compressor
After doing a lot of research, I settled on this Makita air compressor. It is by far the most un...
-
Wife's Anniversary & Mother's Day Present (Post #2)
The wife’s picket fence is finally completed and just waiting for the morning glories and m...
-
Wife's Anniversary & Mother's Day Present (Post #1)
My wife wanted to get her garden tilled and planted. It was during the time I was laid up after ...
-
Finally Getting Back To Work!
After being layed up for over 10 weeks I am finally getting back to work! I have worked in Lowe&#...
-
Gout
Hi Fellow Lumberjocks I have been laid up now for two weeks with gout in the left foot. Never ...
-
Talk About Customer Service!
I bought a Fein 9-20-24 Vaccum from www.Tools-plus.com and the auto switch started acting up. Som...
-
McBridge Cabinets - Dust Collection In!
McBridge Cabinets – Dust Collection The dust collection unit that I chose for my 14 X 21...
-
McBridge Cabinets - Progress on the New Shop
Bow season is over and it is now time to get the shop done. My next step was to close up the two...
-
McBridge Cabinets - Progress on Starting New Shop
The new shop is finally getting done. I decided to put the shop in our 14 X 21 garage. My wife ...
-
What Grandpa won't do for his granddaughter!
Kids are a wonderful thing, but grand kids, now that’s really something special. We had my...
