|Blog series by MyChipCarving||updated 07-03-2011 04:37 PM||4 parts||15070 reads||23 comments total|
Last night I applied the pattern to the top of this 16×9” stationary box top and got started on the chip carving. This is a fun one, for sure. I created this design after looking many times at a table cloth pattern. I knew that table cloth design could be chip carved so I used the basic layout and created this design to fit the top of this box. Stay tuned for more carving on this box…Martyhttps://www.MyChipCarving.com
You know, I don’t regret commercials on TV when I have my carving project on my lap!While I didn’t accomplish a lot last night, I did make some progress.I zoomed in on the corner so you can see some of the detail and crisp cuts desired in chip carving.Martyhttp://www.mychipcarving.com/Chip_Carving/Pages/chip_carving_free_eletter.htm
The carving is finished on this stationary box and I added some texture to the corner designs.I’m toying with the idea of texturing the oval border shapes on the front and top.What do you think?
To complete this jewelry box for my wife, I applied one coat of sanding sealer, two coats of amber shellac mixed with medium brown and red mahogany dye, followed by two coats of satin lacquer. All materials were sprayed on using an airbrush. I made two trays and lined the box and trays with red velvet.Your comments and feedback are welcome!Shelley loves it :-)