LumberJocks

turquoise inlay practice and Deft test

  • Advertise with us
Blog entry by MrLaughingbrook posted 04-13-2018 02:13 PM 275 reads 0 times favorited 0 comments Add to Favorites Watch

I’ve been learning to inlay crushed turquoise and have had some problems with the CA glue staining the adjacent wood. I read somewhere that a turner used Deft to protect the surrounding wood during his inlay. It works great and I’ll use it from now forward.

1. Applied two coats of Deft acrylic.
2. Cut the groove
3. Fill groove with medium then fine stone
4. Apply thin CA, then medium CA. I was purposeful on this test to splash some CA glue and add a large drop on the Deft protected wood.
5. Chisel, then sand until the surface is flat and the acrylic is gone.

In the pictures you can see that the acrylic did protect the wood from CA.

-- MrLaughingbrook



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com