Chris Moellering's Blog

  • Advertise with us
This blog is written by Chris Moellering | 10 entries so far

Latest Entry

Jigs and Such #4: True ZCI for my Table Saw

02-17-2013 07:47 PM by Chris Moellering | 2 comments »

I had previously made a proof-of-concept semi-zero-clearance-insert for my table saw. (Yes, partial-zero-clearance makes about much sense as partial zero-emission which I have seen on several vehicles lately. Seriously? My car is zero-emission most of the time, because it’s not running…but I digress.) The other day I decided to get down to doing a “real one.” Same basic method as the previous one. I finally concurred the cut-through by using a smaller blade from my circular saw to pilot it out enough, then change to my 10” blade and complete the cut. A bit tedious, but it worked. Now the funky metal insert is sitting in a drawer in my toolbox.

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase