LumberJocks

Table Saw Infeed #1: Part 1 - Design and Rail Build

  • Advertise with us
Blog entry by MikeGCNY posted 603 days ago 1476 reads 0 times favorited 0 comments Add to Favorites Watch
no previous part Part 1 of Table Saw Infeed series Part 2: Getting Close »

I am building some cabinets and need to cut a few (10) 4×8 sheets of plywood. Usually I have someone come over and help me, but that is no longer an option. I looked into several infeed systems but decided to build my own with some material that I had laying around.

Basically, it is similar to the Ezee Feed system. There is a rail that hands below the fence rail, an on this hangs brackets that support one end of the infeed table. Below are some pictures of the rail and the sliding bracket that I came up with. I basically used some L channel aluminum with some UHMW polyethylene strips to help it slide a little better.

The table should be a simple build. I ordered some transfer balls for the table. I will post updates and then a video of it in action once it is completed.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase