Table Saw Infeed #2: Getting Close
This is pretty much the same as the Ezee-Feed system. I built it using all cull plywood. I purchased the aluminum online from a place that will cut everything to size (the aluminum cost less than the shipping). The Transfer balls are available at Harbor Freight. The T-Track, knobs and hinges are from McMaster-Carr. Infeed Support I supported the infeed using some aluminum L channel that mounts to the saw using a T-Track. This allows the whole unit to slide left and right fairly easily, although not as easily as I had hoped. I plan on changing this to use some aluminum extrusion and sliders. Attachment Bracket: UHMW polyethylene strips on the back and underside help ...
