LumberJocks

Mario's Favorites

  • Advertise with us
View Chris Davis's profile

Daily Update #24: December 31, 2009

12-31-2009 04:28 PM by Chris Davis | 0 comments »

What’s happening in the shop for December 31, 2009 . Yesterday didn’t even pick up a hammer in the shop. I was at work for 12 hours doing cut-list, orders, email, and all that other office stuff. Today I do plan on finishing out Grimm’s Ross murphy bed and building that Batmobile bed. For missed video and building pictures see my Current Projects link at wwbeds.com or poggyskids.com. Watch us live: <div></div>

Read this entry »


View cbMerlin's profile

Charging Station - No more worries

10-18-2009 11:20 PM by cbMerlin | 12 comments »

I read one too many stories about over-heating batteries during re-charging. Went out to the shop the other day and realized I forgot to take a battery off the charger. It was extremely warm! I didn’t want to burn down the house, not to mention the cost of replacing batteries, so I made this station. I found the timer switch on e-bay for about half the price of a local purchase. I had everything else left over from other projects so my total (new) investment was under $15. Had the rece...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 50 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View Sam Yerardi's profile

Starting a Woodworking Business #1: Deciding what kind of work to do

08-11-2009 04:54 PM by Sam Yerardi | 37 comments »

For me, one of the hardest things to decide in starting a woodworking business was to determine specifically what type of work or product I wanted to pursue. I’ve done a lot of different styles of woodworking, ranging from kitchen ducks to Queen Anne reproductions. It seemed to me that at either end of the spectrum, there were more cons than pros if I really wanted to make a living at it. I remember driving by a home where the owner made his living by making all sorts of wood craft objects....

Read this entry »


View Todd A. Clippinger's profile

Attempting Live Feed From Shop

07-09-2009 10:57 PM by Todd A. Clippinger | 59 comments »

I am trying another attempt at a live feed from the shop with ustream. It has dropped off several times but seems to have stabilized for the last several minutes. I updated my Adobe Flashplayer to see if that would help. Here is a link to the project that I am working on: http://www.flickr.com/photos/toddclippinger/sets/72157618830672749/ Here we go-

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase