LumberJocks

MarineGator's Favorites

  • Advertise with us
View Filinvested's profile

Scraps to Beads

10-16-2010 01:13 PM by Filinvested | 20 comments »

I’ll try to explain how I did this project:http://lumberjocks.com/projects/38288 1. I take a cutoffs, which just can’t to waste 2. Cut them into small pieces, not necessarily cubic: 3. Disks we need: 40, 120, 320 sand paper and wool disk 4. A tin and PVC stripes for soundproofing: 5. My driil. It can work for hours at speed ‘C/D’ (i have been told it could be problem for drills). 6. An IKEA stool and milled groove in it for the tin. 7. The...

Read this entry »


View Sinister's profile

Cutting board build blog.

04-12-2010 04:10 PM by Sinister | 31 comments »

I recently uploaded pictures of a cutting board (http://lumberjocks.com/projects/30543) and several fellow LJs asked me to show how it was put together. Subsequently, Patron quickly deduced the process and wrote a nice blog showing the step by step process for how to achieve the pattern. I encourage anyone who is interested to take a look because he has some nice pictures outlining the process. http://lumberjocks.com/patron/blog/15074. I thought I would add a short amendment to his blog de...

Read this entry »


View wnwoodworkingschool's profile

5 Cuts to a "Perfect" Cross Cut Sled

03-01-2012 02:39 AM by wnwoodworkingschool | 50 comments »

I’ve been getting a few email requests for a video on how I calculate the error ratio and how to correct and construct a cross cut sled that’s dead on square. I’ve been demonstrating this at the Woodworking shows for the past 5, 6 years and I still get emails asking me about the error ratio calculations. So here it is. Material List for sled:Runners: 5/16” x 3/4” x 30” Base: 1/2” x 34” x 30” Front Fence: 1-1/2” x 5” x 30R...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com