LumberJocks

Batmobile Toy Car #2: A better way to cut the flutes

  • Advertise with us
Blog entry by Tony Slattery posted 06-20-2015 08:53 AM 1024 reads 1 time favorited 1 comment Add to Favorites Watch
« Part 1: How to make a batmobile toy car Part 2 of Batmobile Toy Car series no next part

Cutting the flutes for the batmobile toy car proved to be not quite as simple or easy as I would like it to be, so I tried a different way – this time with a carving gouge or chisel.

I have a few inherited from my grandfather some years ago – they are not quite as sturdy as wood turning gouges.

The smaller one is about 6mm across, with a radius of 12mm or so, and the other one is about 15mm across, and I’m guessing the radius would be about 19mm or 3/4 inch.

Also decided that using a hole saw instead of a fly cutter is a much better idea to cut out the wheel arches.

For one then, don’t have to clamp the work piece, and a lot better because I am cutting a 3/4 hole.

Free plans to download

-- Tony, Australia, http://www.wooden-toy-plans.com/



1 comment so far

View crowie's profile

crowie

1497 posts in 1417 days


#1 posted 06-20-2015 09:00 AM

Good photos and notes Tony….thank you

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com