Machine mods, oddities, and fix-ups #12: Cantilever roof support for outdoor machine

  • Advertise with us
Blog entry by Loren posted 08-25-2013 10:20 PM 1103 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 11: Stroke sander Part 12 of Machine mods, oddities, and fix-ups series Part 13: router mortiser »

I welded up these cantilever supports and bolted them to
the back of my stroke sander. The sander is about 11’
long. I’ll put some corrugated roofing across there
to keep the rain and dirt mostly off the machines.
It doesn’t snow in my climate so the almost flat pitch
is okay.

The machine in front of the stroke sander is an
edge banding press. I made the cantilever arms
long enough to support roofing for both.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics