LumberJocks

Marquetry jewelry box

  • Advertise with us
This blog is written by Longcase | 12 entries so far

Latest Entry

Marquetry card table by John Linnell #6: Table top banding

01-04-2017 04:14 AM by Longcase | 3 comments »

Time to turn my attention to making the banding on the table, the banding is very narrow, only 3/16” wide.!https://s3.amazonaws.com/vs-lumberjocks.com/oj8kmy7.jpg! As can be seen on the original table ,it is made up of 2 different veneers (satinwood and mahogany)each being .036 thou , stacked in 2 ways,satinwood /mahogany/satinwoodmahogany/satinwood/mahoganyAnd glued together I made a simple jig to cut the veneer sandwich, the lengths being 1/16” for the small pieces and 3/4” for the larger With the pieces cut to width The banding can now be assembled, I use painters tape to hold the pieces in place, this also helps when it is time to glue up. I need...

Read this entry »

Older Entries

View all 12 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com