| Blog series by Les Hastings | updated 360 days ago | 4 parts | 1708 reads | 29 comments total |
Part 1: Divided light doors
The bow front vanity that I just posted has an upper portion with tall glass doors on each side with a curved bonnett going between them. I’ve been making the parts for the doors for a couple of days or so now. Finally getting started putting some of the muttins together. Sorry I’m going to blog how I go about this, it would be kinda tuff to explain I think. There is a lot to it. I just thought I would share some pictures of some of it with you all. There will be two doors lik...
Part 2: First pair almost done
Finally getting the first pair pretty much done, just need to to do a little more sanding. I put the muttin bars all together and made them so I could set them in the back of the door after the door frame was already glued up. This first picture is of the last glue up putting them inside the door frame. The rest of the pictures are of the doors already hinged and hanging in the cabinet. There’s a wide gap between them right now. One door will have a style attached to it when its...
Part 3: Second set
Finally got around to doing the second set of doors. This what they look like. I’ll post some finished photo’s when I get it all done. Thanks for having a look!
Part 4: The rest of the project
The two smaller divided light doors were in individual cabinets that set on each end of the vanity. Between those two cabinets is a curved bonnett connecting the two cabinets together. There will also be a crown wraps the the top of the bonnett and continues around the room. Thought maybe you’d like to see what the doors were going in. Here’s a few pictures with it all together. Thanks for having a look.
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
