LumberJocks

Craftsman Table Saw 28462 #9: Notional Tenon Jig for Table Saw

  • Advertise with us
Blog entry by LegendInMyOwnMind posted 05-22-2011 02:37 AM 1413 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 8: Table Saw Sled Part 9 of Craftsman Table Saw 28462 series Part 10: It's Hip to be Square »

One of my objectives in making the table saw sled is to mount a tenon jig to the sled. I want to bolt down the tenon jig into T track so I am adding a slot for the T track to the sled top. To do that I need to know the distance from the blade to the track. I’ve done a notional design using 3/4” lumber which shows the track needs to be 5-5/8” from the blade edge.

-- Doug - When all you own is a hammer, everything looks like a nail.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase