Delta Mortiser 14-651 #4: Mortise Table Design

  • Advertise with us
Blog entry by LegendInMyOwnMind posted 05-15-2011 03:29 AM 1217 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 3: The Manual On-line Part 4 of Delta Mortiser 14-651 series Part 5: Base [mostly] done »

I quickly modified my Router Table Design to lower the top by 1.75”. I also provided for a tray in the base of the unit. Instead of having the bottom stretchers screw together outside the legs I made this design so that the stretcher from the front to the back goes inside the legs. That basically makes the sides for a box. All it needs is a piece of plywood to form the bottom of the base.

The cut list is:

The tool footprint on the tabletop is:

Normally a tool this big would need a deeper table due to mounting hardware interfering with the base. I had to do some work to the Miter saw base to fit it on the small base. In this case, the mounting holes are quite a ways in so there should be no problem/

There’s no indication in the manual what size the mounting hole screws should be.

-- Doug - When all you own is a hammer, everything looks like a nail.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics