LumberJocks

Lazy_K's Blog

  • Advertise with us
This blog is written by Lazy_K | 28 entries so far

Latest Entry

Stool II, the making of a Cabriole leg

01-28-2016 07:11 PM by Lazy_K | 2 comments »

Because someone asked… making a cabriole leg, either round or squared isn’t nearly as hard as some think. First: make up your pattern…then draw it on the side and front of your leg stock. then proceed to cut it out ;)If you have a bandsaw, start on one side, leave a little (1/4”) uncut at the bottom of the cuts, so you’ll need to cut in from both ends. cut all of the cuts on this side like this, if there is an area on the “underside” (side away from your lines) you can cut it completely away if the leg will still be supported well. Then rotate to the other side, most of your lines will still be there, refresh any you need to w...

Read this entry »

Older Entries

View all 28 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com