LumberJocks

Treadle Lathe #6: Steady progress | Frame assembly soon

  • Advertise with us
Blog entry by LastingBuild posted 11-15-2018 08:16 PM 556 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 5: Upright mortises and dry fitting the first through tenon Part 6 of Treadle Lathe series Part 7: After months of work..... »

Since my last post, I cut the mortises on the uprights (three legs) and began hogging out the mortises in the three mating feet. The tenons are quite large and the mortises are taking around 15 drill holes using my brace and bit. The vintage Stanley brace and Irwin company auger bits I’m using are a real pleasure though. Each tenon is 3 inches long and I’m drilling the mortise to 3 1/4” depth. Once the three mortises are complete, I can fit the frame together for the first time. Then we will begin the building the functional parts of the machine. Thanks for reading and I welcome you to check out the video as well.


View on YouTube

-- LastingBuild



1 comment so far

View LastingBuild's profile

LastingBuild

61 posts in 117 days


#1 posted 11-15-2018 08:24 PM

I had a little trouble getting the link to imbed. Let me know if you can’t access it!.

-- LastingBuild

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com