2 1/2 ton military truck
Latest project Either the plans were not very clear or i just didnt get it but either way i had to remove the front axle and position it further back from where it is in this photo Time to attach rails on bed, marked them with tape in case i didn’t drill the holes in the bed exactly the same distance apart. Was a good thing i did because some were off just a bit. most of the rails removed so progress can continue, i had to take the gas tank (cedar) off and move it forward about 1/16 to get it closer to the battery box I installed later. The tape near the door is so i can mark the location for the grab bar. Bent up a few coat hangers for the ribs to hold up the cloth cove...
