LumberJocks

Miter-gauge Fence

  • Advertise with us
Blog entry by Dave Owen posted 01-25-2010 06:48 PM 3914 reads 4 times favorited 7 comments Add to Favorites Watch

Shortly after completing my shop in 2003, I bought an Incra V27 Miter-gauge. This adjustable Miter-gauge fence I made for it has been one of my most used accessories. I use it mostly on the band saw, but also on the table saw and router table. When I made the fence, I had no thick lumber, so I glued together two pieces of 3/4” oak – then reduced its thickness to about 1-1/8”. The overall length is about 15” land the height is 2-1/4”. The two threaded stud knobs combined with the aluminum track lets me quickly adjust the fence as needed.

The first of the following two photos show the holder I made for the front of the bandsaw cabinet. and the second shows the gauge in its holder.

-- Dave O.



7 comments so far

View NBeener's profile

NBeener

4806 posts in 1840 days


#1 posted 01-25-2010 07:03 PM

NOW you’ve done it.

You’ve made a really beautiful and functional piece of equipment (the V27) even MORE beautiful and functional.

Might just have to steal your idea. Very nicely done!

-- -- Neil

View GMman's profile

GMman

3902 posts in 2364 days


#2 posted 01-25-2010 07:17 PM

Great jig.

View Greg..the Cajun  Box Sculptor's profile

Greg..the Cajun Box Sculptor

5142 posts in 1975 days


#3 posted 01-25-2010 07:31 PM

Very nice. I have the Incra Miter gague but it has an aluminum fence that doesn’t look nearly as nice as the one you built. I like your storage holder also.

View stefang's profile

stefang

13104 posts in 2001 days


#4 posted 01-25-2010 07:38 PM

Nicely done Dave. Just from seeing your saw table top, I expect you have a very well maintained and equipped shop. It’s wonderful to see and something to aspire to.

-- Mike, an American living in Norway.

View blackcherry's profile

blackcherry

3164 posts in 2489 days


#5 posted 01-26-2010 01:09 AM

Incra makes some incredible gauges. I have this one as well and it travel from machine to machine. Woodpecker is sell the SE1000 for 105.00 right now …reg 159.00. Thanks for showing your jig for this gauge,great concept may have to a just mine as well…Blkcherry

View ratchet's profile

ratchet

1292 posts in 2453 days


#6 posted 01-26-2010 01:35 AM

dave; Excellent idea and execution in tool upgrade and storage solution.
Favorited for future use.
Thanks for sharing.

View ND2ELK's profile

ND2ELK

13495 posts in 2440 days


#7 posted 01-26-2010 02:57 AM

Looks good Dave. I need to make a holder for my miter gauge and yours look like a good idea. Thanks for the inspiration.

God Bless
tom

-- Mc Bridge Cabinets, Iowa

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase