| Blog series by Kevin | updated 621 days ago | 3 parts | 3367 reads | 35 comments total |
Part 1: Initial Sketchup Drawing - ideas welcome
Well, I finally sat down last night night and drew up the shop. This was the first attempt, so it may change some. Also most of the tools/cabinets are very rough or borrowed. I’ll try to get them better when gets closer to constructing them. I’ll start you out on the East wall. Most of this is already set in stone you might say. I am planning on putting a pipe rack over the double garage door. May get used for dimensional lumber storage as well. On the left is my double ...
Part 2: Venting - Why can't you be level
I can’t even discribe to you all how I felt Sunday. I don’t think those words are appropriate here, but I’m sure most of you have used them before. Have you ever assumed something. There is a reason that people say assume makes an ass out of u and me. I do know better, but my Dad was at the house Sunday and we thought we’d get a bunch done. The first order of business was to get the crown molding and other moldings out of the middle of the floor so we had room to...
Part 3: South wall redesign and Progress Pics
Latest design for South wall This is my design for a cabinet to hold all of my bolts, screws, and nails. Progress Pic of it. Bolt bins are in place. This is my design for a cabinet to hold all of my wood finishes and glues and my wifes paint. (unsupported end screwed to studs) Progress pics, sorry for all the junk in the way. I had to throw everything out of the middle of the floor in order to fit the triler in overnight. Workbench is in the background (not for fine wo...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
