LumberJocks

Dust Collection #1: Dust Collection Accesory/s

  • Advertise with us
Blog entry by Roger posted 12-19-2016 10:55 PM 1618 reads 1 time favorited 14 comments Add to Favorites Watch
no previous part Part 1 of Dust Collection series Part 2: Dust Collection #2 »

In the continuing road of dust collection, Wynn, Donaldson, and many other filter places, Since adding the Onieda Super Dust Deputy to my collector, I’ve been wanting to buy a canister filter for my H.F. 2hp dust collector that many of us have. After numerous hours on here and throughout the gr8 internet, I finally pulled the trigger on this one:
It is a Grizzly H5783. It’s actually a replacement canister for the Grizzly dust collector’s, G0548/Z & G0562/Z, but this fits our/my HF 2hp collector. It fits it like it was made for it.

It fits over the lip of the HF collector perfectly (I had to “finesse it” ever so slighty). It comes with a built in flapper that I really liked for an option. Every now n then just give it a spin to know off any dust that will be collection on the filter element.

A lot of you may think this is a bit costly, I do too, (about 220 w/shipping), but, my lungs are gonna appreciate it down the road. After firing it up today, I am over the top satisfied.

Here is a few pics of the old, nasty, caked-up upper bag that this cannister replaced: Notice how nice of a fit

I also replaced the bottom bag with a new one, & emptied out my can. I even put a new filter in my over-head air cleaner so I am starting out with everything clean.

Here it is with the new canister on it:

I am truly impressed at how much more suction this has. It even seems like it may be a hair quieter…..I always wear earplugs anyway, but, it does seem a bit quieter.

Anyhoo, I feel this is an amazing addition to the HF 2hp collector. I still need to re-position the impeller to make it more efficient. That’ll be after the holidays are over, and I’ll add my thoughts on here later.

Thnx for the looks, comments, good/bad/ugly. Always appreciate ya’ll’s inputs and thoughts. As I always say, Work/Play safe. Keep that dust collector fed.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com



14 comments so far

View Grumpy's profile

Grumpy

22788 posts in 3601 days


#1 posted 12-19-2016 11:05 PM

Looks like a good setup Roger, nice and compact.
After my 1hp unit carked it I ended up getting a 2hp unit. It sits outside now so I don’t need to worry about a filter.
Well done buddy and have a great Christmas.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View Jim Jakosh's profile

Jim Jakosh

19070 posts in 2856 days


#2 posted 12-19-2016 11:40 PM

Nice mobile dust collector. That is nice that the filter has a wiper in it. That dust will hang in those folds.

Thanks for sharing….............Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View recycle1943's profile

recycle1943

1436 posts in 1372 days


#3 posted 12-19-2016 11:46 PM

Not too sure what I’m looking at but I have a Grizzly 240v G1029 2hp dust collector w/fiber bag top and bottom and my top bag ( nor the bottom bag) ever looked like that. Pretty sure the top bag on mine is a 5 micron bag, could be wrong. It is at least 10 years old so who knows ?

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Joe Lyddon's profile

Joe Lyddon

9884 posts in 3802 days


#4 posted 12-19-2016 11:47 PM

Very good, Roger!!

It’s nice when a plan comes together… – The A-Team -

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View andy_P's profile

andy_P

409 posts in 2958 days


#5 posted 12-20-2016 12:00 AM

That’s quite a system you have there, Roger. Looks like you have made some additions to the original HF collector. I probably should look into getting a new upper bag myself. Like I said before, I have a Penn State collector. OK, my man, good luck with the system. I’m waiting for notification fro Grizzly that my Air filter was shipped.

-- Wood is a gift from God/Nature that maintains its beauty forever via the hand of a woodworker.

View lew's profile

lew

11744 posts in 3505 days


#6 posted 12-20-2016 12:13 AM

That’s really a nice setup!

What’s the life expectancy on the filter cartridge?

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View CFrye's profile

CFrye

9657 posts in 1590 days


#7 posted 12-20-2016 03:43 AM

Congratulations on the upgrade, Roger! Looks great.

-- God bless, Candy

View eddie's profile

eddie

8565 posts in 2364 days


#8 posted 12-20-2016 04:32 AM

Roger i just added one too, and it made a lot of difference , looks great and the air is cleaner happy christmas and merry new year

-- Jesus Is Alright with me

View doubleDD's profile

doubleDD

6481 posts in 1793 days


#9 posted 12-20-2016 04:38 AM

I was not aware that Grizzly sold canister filters. You have a great set up. I am looking into this now. Thanks Roger.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View peteg's profile

peteg

4120 posts in 2573 days


#10 posted 12-20-2016 04:53 AM

Nice set up Roger. gota keep those lungs clean :-)
Merry Xmas bud
Pete

-- Pete G: If you always do what you always did you'll always get what you always got

View Cory's profile

Cory

760 posts in 3169 days


#11 posted 12-20-2016 05:12 PM

Nice! I had a similar set up for a long time and it worked great. Healthy lungs = happy shop time!

-- The secret to getting ahead is getting started.

View hairy's profile

hairy

2542 posts in 3282 days


#12 posted 12-21-2016 12:41 PM

Way to go! 1 thing I have noticed is the flapper helps, but doesn’t get it all out. I found that out when I was having motor problems with my DC, the tech rep I talked to had me clean it out. I was using the flap on a regular basis, and was surprised how much remained. Every so often use a blow gun, low pressure, and blow it out, from the outside in.

There’s no such thing as too much dc.

-- stay thirsty my friends...

View Roger's profile

Roger

20871 posts in 2554 days


#13 posted 12-21-2016 12:45 PM

Thnx for the looks, tips, and comments ya’ll.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View steliart's profile

steliart

2473 posts in 2438 days


#14 posted 02-22-2017 04:54 PM

Soon very soon I will be addressing this duxt collector problem also, Very good work Roger

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com