My Shop

  • Advertise with us
Blog series by Kent Shepherd updated 12-06-2016 07:01 PM 3 parts 12226 reads 18 comments total

Part 1: Router Sled

04-09-2010 06:58 PM by Kent Shepherd | 3 comments »

Last summer I posted this project—-My Router Table Sled just hit me, I never really showed how the jig could be used. Here is a practical application.I was actually building another jig and needed to slot some small pieces for adjustments. I posted a similar jig last week. I needed another. This one is tweaked a bit. I planed down a scrap of Mahogany I had laying around. (Sorry—no Bubinga) The Mahogany matched my sled ——if you&...

Read this entry »

Part 2: Kerfmaker--Table Saw Set-up

09-26-2011 07:55 PM by Kent Shepherd | 13 comments »

There has been much discussion on the Bridge City Kerfmaker, but I didn’t find where it was used on a table saw without using a sled with a stop. I am sure I just missed it, but here is my version of the set-up. The Kerfmaker references off a stop on a fence, which works very well for a fence on a radial arm saw or table saw sled. But using the table saw fence to cut slots for my box bottoms and lids, I discovered there was not reference point for the Kerfmaker. I made a simple block...

Read this entry »

Part 3: Dust Collection

12-06-2016 07:01 PM by Kent Shepherd | 2 comments »

I have owned a Jet Dust collector for some time now, and have always hated emptying the bag. Recently, one of my customers offered to swap this cyclone from a school wood shop for a product in my store. It was perfect for my needs so I jumped on the opportunity. Having several pieces for the duct work already, I did not have to buy much to get it set up and going, The worst part was finding the time! Using 5″ flex hose I rerouted the air flow to go through the cyclone. The bag only gets what...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics