LumberJocks

Ken90712's Favorites

  • Advertise with us
View PurpLev's profile

Sketchup Resources #9: Wudworx Board Maker Plugin

08-12-2010 10:34 PM by PurpLev | 14 comments »

OK, so it all started when I was trying to write a blog to post as a tutorial for people starting out with SketchUp. halfway into the blog, I decided that a video would probably be easier for me, and easier for others. so I stopped the blog, and started capturing the video. Halfway through the capture I figured that I probably will need to go a little more basic and a bit more in detail in order to be more clear about certain things that I do – so I stopped the video. Then it hit me ...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 97 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View SPalm's profile

Staggered Steps Endgrain Cutting Board

06-27-2010 03:56 AM by SPalm | 45 comments »

This is a new style of cutting board (at least new to me). I was thinking about 3D designs on the way home from work last week, after Martyn’s Blog and Steve’s Video. So I came up with this. Kind of Sinister, kind of Tumbling block. Once I drew it out, it reminded me of Staggered Stairs (which are kind of cool), and reminded Karen of the Steps on the Row Houses in Baltimore. So that is how the name came about. I started with 6/4 walnut cut into 10 inch strips. This small length makes ...

Read this entry »


View Andy's profile

"Art Box" Tutorial #14: Dividers

08-22-2009 03:12 PM by Andy | 40 comments »

Updated 1/15/12

Read this entry »


View degoose's profile

Stingray box and how I do it

05-01-2009 08:52 AM by degoose | 22 comments »

Glue up half a dozen bits of board to make the block.,I used Tassie Blackwood and then bandsaw the back off at about 1/4 inch [ sorry no pics of this step] Glue the template to the block and bandsaw the drawersGlue the back ..back on..Cut front and back from drawers and then cut recess from drawer carcasses and then after sanding the insides glue the back and front back on.,..then cut the outside from the main bodySand for a few hours or days and then finish with your choice of finish?

Read this entry »


View Stevinmarin's profile

How to make a bandsaw box

05-29-2010 10:43 PM by Stevinmarin | 42 comments »

Wow, there are a bazillion examples of bandsaw boxes on LumberJocks. I always thought they were complicated and had a hard time finding some really basic instruction. Well, here is a video for all of us bandsaw box newbies! The neat thing about bandsaw boxes is that if you give them away as gifts, people will be amazed and wonder about your woodworking prowess. They will think you are a woodworking god! Little will they know that you are a Mere Mortal and these boxes are totally easy to cr...

Read this entry »


View mtnwild's profile

Basic grill making

06-08-2009 02:08 AM by mtnwild | 9 comments »

I made a few bread cooling racks and was asked how I did that. This is how. I start with two pieces of wood. One for the width and one for length. Then I cut the slots in each piece. Exactly one half the thickness of the wood. The space between the slots does not matter. I just eye ball it, because it’s too hard for me to do the math. They will fit no matter what spacing you cut the slots, believe me. Random or calculated. ..Then I cut the boards into strips exactly as...

Read this entry »


View Allison's profile

Austin's Hardwoods & Hardware

03-30-2008 06:01 AM by Allison | 24 comments »

I want to take a minute (or 2or 200) to tell you about an awesome place I found in southern Ca, Santa Ana to be exact. The name of it is Austin Hardwoods & Hardware(714) 953-4000 610 N Santiago St, Santa Ana, CA 92701. The cross streets: Between E 6th St and E Santa Ana Blvd, This is the most outrageous place to locate the elite of hardwoods. Less than 20 miles from my fathers house in so. Ca. It is an absolute must stop for me when I go down to visit my father. They have wood there th...

Read this entry »


View Martin Sojka's profile

LJ Woodworking Awards - Summer 2009 #4: The Results Are In!

08-09-2009 03:25 PM by Martin Sojka | 14 comments »

Another outstanding LumberJocks Woodworking Awards event is over so it’s time to officially announce the winners. The winning projects were selected from 54 total submissions in an online voting held from August 1 to August 7. 123 votes were cast during this period. And here are the winners… ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1st Place – 217 points 2nd Place – 109 points 3rd Place – 109 points 4th Place – 103 points 5th Place ̵...

Read this entry »


View John Nixon's profile

The Super Sled #2: VIDEO - Mitering and Crosscut Sled

03-08-2009 05:17 AM by John Nixon | 21 comments »

To download a measured drawing or to see the full photo gallery, click here:http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx Project Description: I just completed a two part video series on how I made my new table saw sled. I’ve named the new sled the “Super Sled”. The Super Sled combines two of my best shop jigs! I love my original crosscut sled, so when the voters at Eagle Lake asked me to make a video about how to make that s...

Read this entry »


« prev 1 2 3 4 5 6 next »
54 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com