LumberJocks

Ken90712's Favorites

  • Advertise with us
View ganders's profile

The quick and dirty instructions on how to make a zig-zag pattern cutting board.

08-06-2008 12:26 PM by ganders | 25 comments »

The quick and dirty instructions on how to make a zig-zag pattern cutting board. Click on the pictures to see a full size image. Choose a couple different types of hardwood. The more colors the better. Below is cherry, maple and walnut. Rip strips of wood any width so the total with is about 12”. This is the width that will fit through my planer. The beauty of this is that none of the widths have to be the same. The board shown below is made of scrape wood. If you only have shor...

Read this entry »


View BritBoxmaker's profile

The EZ mitre technique

07-26-2010 10:55 PM by BritBoxmaker | 79 comments »

Hello all. Well I seem to have whet the appetite a bit so here goes for a ‘novel’ technique for making mitred boxes. Its a bit like making a box out of paper, like they showed you at school, using a ‘net’. Only in 3D, with wood and a tablesaw (not sissors). Well first comes the board Its made from alternating strips of Maple and Rosewood of varying thickness. I won’t bore you with the details on how to make it suffice to say that all the corners must b...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 51 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View Mary Anne's profile

How to make a Wild 'n' Crazy two-tone board

09-27-2010 10:09 PM by Mary Anne | 33 comments »

Sometimes the finished project looks harder to make than it really is. By request, here is a quick tutorial on making a two-tone pattern board. All you need is a bandsaw… or maybe a scroll saw. Start with two boards of contrasting woods squared and surfaced on all sides. ——Use double-sided tape to align and stack them. (carpet tape works great) ——- Cut random curvy lines through both pieces on the bandsaw. This was my first test of the Carter S...

Read this entry »


View FlWoodRat's profile

Tool Box Video is now available on Tommy MacDonalds website and its FREE.

10-07-2010 08:57 PM by FlWoodRat | 10 comments »

Tommy has done it again. His updated website is now provided twenty plus video clips of the Tool Box Build. FYI, Tommy released a DVD on this project about a year ago. I bought it when it came out and all I can say is that it is a well produced, high quality product. Now, it’s even better. Tommy is giving it to us. That’s right.. FREE BABY!.. Follow this link to get to T’s website. http://www.thomasjmacdonald.com/ Now, look in the lower right corner under “What&...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

10-04-2010 11:38 PM by McLeanVA | 62 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #2: Zig Zag Cutting Board Patterns - Inspirational

10-05-2010 09:19 PM by McLeanVA | 25 comments »

I was absolutely overwhelmed by the positive response to my Zig Zag How To blog post yesterday, that I decided to brainstorm some possible combinations (on my lunch break) using the basic steps I outlined yesterday. All of the same techniques and steps apply, and really the only difference is the woods and measurements that make up the original “sticks.” Same rules apply to width = height. Length is up to you. Please experiment with whatever measurements and combinations strike...

Read this entry »


View mafe's profile

How to use a Kerfmaker (trying to help out!) Blog.

09-21-2010 09:14 PM by mafe | 43 comments »

How to use a KerfmakerOk, many asked me this question, and I have seen it again and again on LJ. If you need to find out how to make one, you can see my Kerfmaker 'Brass'n wood'. Another fun gadget is the tenonmarker:http://lumberjocks.com/projects/39236 I’ll try to explain, as well as I can, feel free to ask questions if I do not make myself clear (I’m only human): Collect what is needed, in this case a base stock and two thinner side stocks, and of course a Kerfmaker...

Read this entry »


View FredG's profile

Japanese woodworking vids

09-05-2010 02:16 AM by FredG | 8 comments »

A couple of nice videos on this forum.

Read this entry »


View SPalm's profile

Steps Cutting Board Version 2 (Two Step)

08-18-2010 03:03 AM by SPalm | 84 comments »

This is a second generation Steps cutting board made out of walnut, maple, and cherry. The first Steps board I made used a basic square with edge of maple and cherry to make it a block and a notch to do the stepping. I wanted to try to make a stepping board using the hex Tumbling Block design, and this is what I came up with. In order to make the hex do the stepping, I needed to notch all three sides, as can be seen in the Sketchup drawing. The cool thing here is that it steps in two di...

Read this entry »


« prev 1 2 3 4 5 6 next »
54 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com