| This blog is written by Ken90712 | 32 entries so far |
-
Blondie's Bridal Chest #8: Glue ups & sanding continue and Top starts getting finish applied.
Well this Blog will be a short one. All the panels now have 5 coats of Enduro Var from General Fi...
-
Blondie's Bridal Chest #7: Glued up the Top & all 11 Panels Finally Veneered.
Well these four days off were a busy one. I was constantly going out the shop and garage to eithe...
-
Blondie's Bridal Chest #6: 3 Panels Veneered and Top Dry Fitted
Well I made some progress on Blondie’s Bridal Chest. As some of you know, I had to weld up some n...
-
Blondie's Bridal Chest #5: Press Remake for Veneering Panels
I made some Veneer press’s for this Blog I’m writing on building Blondie a Bridal che...
-
Blondie's Bridal Chest #4: Starting the Veneering for the 11 Panels.
I had a busy week that stopped me from getting much done in the Woodshop. Between work and the Fr...
-
Blondie's Bridal Chest #3: Cutting the 45's and Gluing the Legs Together.
Saturday mornings is usually Blondie’s day to clean the house top to bottom. With that said...
-
Blondie's Bridal Chest #2: Mortise and Tenon's done, Top dry fitted.
Chest is coming along nicely. I finished the Mortises on my drill press yesterday, there were aro...
-
Blondie's Bridal Chest #1: Milling the Sapele and geeting started.
Blondie told me she wanted a Bridal Chest for the end of our bed. We all know when the Boss say’s...
-
Building of my 8 inch wheel drum sander.
Recently a couple of buddies on here asked where I had been lately. Well, between the sports and...
-
Blondie & I visiting Nashville
It seemed this was the best place to post this. Blondie and I are visiting Nashville for some fun...
-
Outdoor Dining table #9: Our Outdoor Table is finished!!!
Blondie wondering where her wine is….. To those of you have been following and helpi...
-
Outdoor Dining table #8: Finishing Started on Bottom, almost done.
Thx everyone for all the great comments. Everyone’s advice and questions are taken in a good way!...
-
Outdoor Dining table #7: Inlays are in and sanding has started!!!! Ughh.
First off, our hearts and prayers go out to all the families in the Midwest that have suffered th...
-
Outdoor Dining table #6: Table edge and Bow Tie Inlays almost finished.
Well it seems I’m finally making some serious progress on our outdoor table. I spent a Cpl....
-
Outdoor Dining table #5: The table top is taking shape!
Well, all the cutting boards are done and have been delivered for the Valentine’s Day requests. ...
-
Outdoor Dining table #4: Finally doing the woodworking portion on the table.
Well life has been busy for me, like most of us on here I’m sure. Between X-mas, work, trav...
-
Outdoor Dining table #3: Powder Coat done! Time to start on the top!
It has been a busy cpl weeks. I had to take a trip to Michigan to cheer my Mom up, who was in the...
-
Outdoor Dining table #2: Welding close to being done, then wood time.
I have finished welding the four cross members that will support the 24×48 piece of granite....
-
Outdoor Dining table #1: Is it right to post 1st phase if all metal?
Fellow Lumberjocks; Is it right to post the 1st phase of a project if all metal? I have been on...
-
Off to Vegas for Woodworking Show!
Not sure on how Many fellow Lumberjocks are goiing to Vegas for the big show. Eric ( Screen name ...
-
Building My Entertainment Center #8: Finallydone and TV is up and running!!!
Finally finished the Entertainment Center. Fist of would like to thank all our fellow Lum...
-
Building My Entertainment Center #7: Offically in the Finishing Stage.
Well, with over 110 hours invested in the home for our new TV, were almost done. I have offic...
-
Building My Entertainment Center #6: Problem on the Top fixed and making progress.
Entertainment Center making progress. Well after some trials and tribulations with the str...
-
Building My Entertainment Center #5: A set back on using dye stain.
I watched the Woodwhisper dye video using the 7 parts Orange & 4 parts Med Brown dye stain by...
-
Building My Entertainment Center #4: Thx for the math Sam on making Ovals for my top
If you are addicted to this site like me you probaly did not miss this post. h...
-
Building My Entertainment Center #3: The top has been glued up and drawer and doors making progress
Well things kind of slowed down for me this past week. I have been on day shift going to Ad...
-
Building My Entertainment Center #2: Need fellow LJ's advice & vote on top.
So, we have started laying out the 8/4 Knotty Alder top. The plan was to have the front edge natu...
-
Building My Entertainment Center #1: Building My Entertainment Center for new TV
I haven’t done many Blogs on Lumberjocks. A cpl of buddy’s on here suggested ...
-
Trip to Tule Peak Timber
Thx Rob for A GREAT DAY! Blondie, Kaina (my Lab) & I, had another great day. F...
-
My comment total will be the #1 spot soon
So as I was looking over the Lumber Jocks List and noticed A1jim has over 36,000 comments, I just...
-
Visiting 2 Lumberjocks and Buying some different wood.
My wife and I had a free day on Saturday and decided it was time to drive down and meet, “S...
-
Happy Forht of July fellow Lumberjocks!
I would like to take a moment to say, “Happy Fourth of July to all that celebrate this day!” I...
