KTNC's Forum Topics

  • Advertise with us
View KTNC's:homeworkshopprojects (2)blog (1)reviews (1)forum topics (3)buddies (0)favorites (18)activity logWatch
04-03-2018 03:43 AM

Ripping short and narrow pieces on a radial arm saw - 14 replies

Ripping short and narrow pieces on a radial arm saw To: all you radial arm saw users I was working with 12” x 12” Baltic birch plywood sheets – 1/8” and 3/8” thick. I needed to cut 2 3/8 inch wide by 12 inch strips from the 1/8” sheets. If the pieces were longer, I would use my board buddies. I w...

12-19-2017 11:51 PM

How do I planarize this slab so I can use it as a table for my radial arm saw? - 18 replies

I’m making a new table for my radial arm saw. This piece of material used to be part of a table. I think its particle board with a laminate top, but maybe it’s MDF. Some form of sawdust and glue anyway. It’s 1 3/16 inch thick, 24 inches wide and 57 1/2 inch long. It’s very stiff, but not planar. If I lay a straig...

12-14-2017 03:37 PM

Outdoor Storage - Jointer - 29 replies

Outdoor storage – Jointer Background: I bought a used General International Jointer in the summer of 2017. I don’t have room to keep this inside my shop. The surface around the shop is gravel which makes it very hard to roll anything around. I decided to keep the jointer permanently outside and do the best I can to prevent dam...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics