LumberJocks

Joanne's Favorites

  • Advertise with us
View Don W's profile

Around the Shop #16: Rough tenon jig

05-26-2011 06:02 PM by Don W | 6 comments »

I had a few request for this so here we go. I used this jig for the Really Rustic Chair and several other similar type projects. You want the hole to be a little bigger than the tenon size you want. You will need to make a template for each size. I had a couple more made but one got broke and the other lost in my shop move. This is the adjustable stop. It determines the lenght of the tenon. I usually make the tenons long and cut them after. I made the router base from aluminum becaus...

Read this entry »


View MrsN's profile

Patchwork Necklace #1: How to make a patchwork necklace

11-24-2010 06:28 AM by MrsN | 8 comments »

So I sprained my foot last week, and my doctor has told me that I need to keep off it as much as possible and keep it elevated as much as possible. I can still sort of scroll, but I look a little funny with a pillow under my bench resting my foot, so I decided to look though my photos to see if I had anything I could blog about.I ran across some photos of a How-to make a patchwork necklace that I had thought about doing once. So instead of actually building something today, I will teach the w...

Read this entry »


View DonW's profile

Puzzles - A Gift Meant To Be Regifted - How To

05-11-2010 02:12 AM by DonW | 3 comments »

Several LJs have asked for a blog entry sharing how I made the mini-puzzles that I use to encourage “re-gifting”. They are really very easy to do for those comfortable with using a scroll saw. Here are the steps… 1. Select the subject of your puzzle. I use business card sized cards that are available at Christian bookstores. They are bright, colorful and have inspiring messages. However, you could do the same project with sports or non-sports trading cards, etc. They woul...

Read this entry »


View kolwdwrkr's profile

Entertainment Center #1: Day 1

01-26-2010 05:55 AM by kolwdwrkr | 6 comments »

I was commissioned to build a “built in” entertainment center but it was under a tight budget. So this project is a paint grade unit, with white melamine base cabinets. This is day 1 on the build. I am blogging this because I am doing this job a little different then I normally would, and I don’t have anything else to do. LOL. Sorry if it takes up to much of your time. This morning I went to the shop I work at and cut all the material, bored for shelf holes, etc. Then ...

Read this entry »


View scrappy's profile

Box Joint Bracelet Tutorial

06-24-2009 08:58 AM by scrappy | 11 comments »

I have been asked to do a tutorial on how I made my Box Joint Bracelet I will be trying to go Step-By-Step and not leave anything out. I know I am missing a couple of pics but will try and explain things as good as I can. The first thing I would like to address is SAFETY There are many ways to do almost any process, depending on how you were taught/learned. Please be VERY carfull when useing your tools. I would hate to see anyone get hurt. Onward: I only used one piece of wood f...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 95 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View David's profile

How to Make Custom Waterslide Decals - UPDATED

02-12-2007 11:09 PM by David | 33 comments »

How to Make Custom Waterslide Decals This Waterlide Decal Tutorial is available as a PDF download on my website Materials List • Clear or White 8.5×11 waterslide paper• Deft Gloss Clear Lacquer• Brayer Roller• Paper Towels• Bowl with clean water SOURCES FOR DECAL PAPER WATERSLIDE PAPER • MicroMark• BelDecal 1. Make decal design on your favorite graphic application.I use a Mac based system so I will share the details of how I do things, however, you can do this on any co...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 50 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 43 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase