Bent-Lamination Dining Room Table

  • Advertise with us
Blog series by JordsWoodShop updated 12-29-2011 05:35 PM 7 parts 25582 reads 16 comments total

Part 1: Building The Form/Mold

11-17-2011 12:03 PM by JordsWoodShop | 6 comments »

In this video I discuss the project we are about to embark on, we look at how to go about making templates and how to build a form/mold for doing lamination – visit for more woodwork related goodness

Read this entry »

Part 2: Finishing The First Lamination

11-19-2011 04:48 AM by JordsWoodShop | 6 comments »

In this video I mill the timber for the legs to final size, re-saw the leg stock ready for lamination and then its finally onto the lamination process. Visit for work woodwork related goodness! Visit Or visit youtube directly Or just watch it here

Read this entry »

Part 3: Project Update

11-25-2011 01:34 PM by JordsWoodShop | 0 comments »

View Original post here Well I managed to get a full days work done today and all I can say is progress. The legs are cut to size and tenons are cut, the solid foot is almost complete (just waiting on a new router bit), the victorian-ash spacer is cut to size, as well as the mortises being cut, not bad for one days work.I still have to cut the spacer that runs across the top of the legs, and get the dowels prepared for the bending but once thats done the legs will be pretty close to co...

Read this entry »

Part 4: Legs Nearing Completion

11-27-2011 04:24 PM by JordsWoodShop | 2 comments »

n this episode the leg’s finally start to take shape. We will make the solid foot, prepare the mortise and tenon joinery and have our first dry assembly. Check out for more woodworking goodness!

Read this entry »

Part 5: Project Update

12-13-2011 11:51 AM by JordsWoodShop | 1 comment »

In this video I give you a quick update letting you know where im currently up-to with the project and why part 4 of the build is taking longer then expected to get online.I also give you some exiting news to do with some new ways of accessing the show.

Read this entry »

Part 6: Completing The Legs

12-18-2011 04:55 AM by JordsWoodShop | 0 comments »

In part four of our bent lamination dining room table project we finally complete the legs.We will look at how I go about cutting mortises using the drill press and hand tolls,we will also fine tune some tenons, then its finally onto creating the cross support and bending some dowels.Check out for more woodwork related goodness

Read this entry »

Part 7: Making The Table Top

12-29-2011 05:35 PM by JordsWoodShop | 1 comment »

In this video I begin to make the top for the table. I mil the timber for the top to be square and uniform, show you a creative clamping technique, and more! For more woodworking goodness visit You can View The video at my website, at my Blip tv channel, or at my Youtube channel, but the much easier option is just to watch it bellow. Thanks For Watching!

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics