8x12 Shed Spring 2011 #6: Lets skip ahead a bit....
We have sheeted the roof, and put the shingles on. We used a rolled roof vent to allow the hot air to escape in the summer. We will put a metal grate with a screen in the soffits to allow the cooler air to come in to push out the hot air through the roof vent. The shingles were matched to the customer’s house, and we went to work fitting the doors into the opening. The doors are the siding that was cut out of the opening in front. We trimmed out the doors with 1×4’s and cut down the doors and trimmed them with 1×4’s as well. Doing this allows us to get a good fit on the doors and give the doors the right appearance with the lines matching up with the sidi...
