I need something mobile for my Bosch 10” Sliding Mitersaw so I started building a cabinet for it with casters. About that time I finished a Stockroom Supply 18” drum sander and needed a place for it…...so I put in a full extension drawer/shelf for the sander, so far I’ve left the sander on it’s shelf and use it sitting on a low stool. There’s room below the sander to store my sander supplies and a compartment below the saw for dust collection. I’m still working on the dust collection for where the dust bag was. We are going to the St.Louis WW Show Friday and hope to get the fittings there. It’s made from Oak plywood and the edges are solid Oak.

I made this pre-collector for my new Delta 50-760 Dust Collector. This project is 1000% worth it, I’ve emptied the can 3 times and there is no more than a quart of dust so far in the Delta’s plastic bag. I chose the 50-760 because it came highly recommended and has space for the collector can. Thanks to LJ Lenny for the large hose to connect Delta to Thien. This is one of the most worthwhile projects I’ve ever made for the my shop.

Here’s a couple of links for more information about the pre-collector:
http://www.cgallery.com/jpthien/cy.htm
http://www.bt3central.com/showthread.php?t=41549

These are most of the clocks, made 11 total, I made for ladies in the family for Christmas in 2008. Each one is made with a different wood and/or trim I routed. They also each contain a secret compartment that is flocked in green.

I liked the idea of CharlieM1958’s post http://lumberjocks.com/projects/847 so I made my version.

I don’t get around well so I do as much of my work sitting down and was always having to get up to get a tool or clamp this cart has taken care of most of that problem. I welcome any comments.