<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <channel>
    <title>John Gray's Blog at LumberJocks.com</title>
    <link>http://lumberjocks.com/JohnGray/blog</link>
    <pubDate>Tue, 03 Nov 2009 22:31:58 GMT</pubDate>
    <description></description>
    <item>
      <title>Choosing a new varnish??</title>
      <link>http://lumberjocks.com/JohnGray/blog/11714</link>
      <description>
        <![CDATA[<p>I&#8217;ve been using MINIWAX Wipe-On Poly Clear Satin and Helmsman Spar Urethane for quite awhile with good results&#8230;.....BUT I can&#8217;t get any right now.  So tomorrow I&#8217;m going to a Borg 70 miles away that only carries CABOT brand I need to get the above items there.<br />Question is has anyone got any feedback on using the Cabot brand or MINIWAX or both?</p>]]>
      </description>
      <pubDate>Tue, 03 Nov 2009 22:31:58 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/11714</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Watertite Watertight Water Tite Water Tight Wooden Box </title>
      <link>http://lumberjocks.com/JohnGray/blog/11584</link>
      <description>
        <![CDATA[<p>I need to make a watertite wooden box for my waterstones and can&#8217;t seem to find the information I&#8217;m looking for.  <br />I believe I saw this on the Woodwright&#8217;s Show but not for sure.  Here&#8217;s what I saw &#8220;by whoever&#8221; they used a wire or thin strip of wood and &#8220;mashed&#8221; it into one half of the joint so it made a groove so the &#8220;wire&#8221; was flush with the surface of the wood, then assembled the joint and the wood expanded forcing the &#8220;wire&#8221; into the other half making it waterproof.<br />I hope you can follow my description.<br />Thanks,<br />John</p>]]>
      </description>
      <pubDate>Mon, 26 Oct 2009 15:40:38 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/11584</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Today's Joke</title>
      <link>http://lumberjocks.com/JohnGray/blog/11499</link>
      <description>
        <![CDATA[<p>One Wish &#8230;...</p>


	<p>A guy walking along the beach finds a bottle and picks it up. A genie pops out and says, &#8220;Thanks for letting me out. For your kindness I will grant you one wish.&#8221;</p>


	<p>The guys says, &#8220;I&#8217;ve always wanted to go to Hawaii, but I can&#8217;t because I&#8217;m afraid to fly and ships make me deathly sick. My wish is for you to build a road from here to Hawaii.&#8221;</p>


	<p>The genie says, &#8220;I&#8217;m sorry, but I don&#8217;t think I can do that. Just think of all the work involved. Think of the huge pilings we&#8217;d need to hold up that highway and how deep they would have to be to reach the bottom of the ocean. And think of all the cement that would be needed. Plus, since it&#8217;s such a long span, there would have to be gas stations and rest stops along the way. No, that&#8217;s just too much to ask. Impossible.&#8221;</p>


	<p>The guy says, &#8220;Well, there is one thing I&#8217;ve always wanted to know. I&#8217;d like to be able to understand women&#8230;what makes them laugh and cry&#8230;you know, what makes them tick.&#8221;</p>


	<p>The genie thinks a second, then asks, &#8220;You want two lanes or four?&#8221;</p>]]>
      </description>
      <pubDate>Wed, 21 Oct 2009 16:20:04 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/11499</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Illinois Indiana Get Together</title>
      <link>http://lumberjocks.com/JohnGray/blog/11011</link>
      <description>
        <![CDATA[<p>Would anybody be interested in having a get together in 2010?<br />Others in the surrounding area would be welcome to come also.</p>]]>
      </description>
      <pubDate>Sun, 20 Sep 2009 13:56:41 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/11011</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Need plan for table saw dust collection.</title>
      <link>http://lumberjocks.com/JohnGray/blog/10317</link>
      <description>
        <![CDATA[<p>I purchased the hood shown in the link below.</p>


	<p><a href="http://www.pennstateind.com/store/R-TDHOOD.html">http://www.pennstateind.com/store/R-TDHOOD.html</a></p>


	<p>And I want to install it on my Ridgid TA3650 saw.  Now comes the good part!!!  I had a plan to build a unit that incorporates the hood.  The unit is 3/4&#8221; plywood (2&#8217;x4 1/2&#8217; approx.) that bolts between the saw and the stand, you screw the dust hood to the plywood.  The plan shows a drawer and shelf using the plywood &#8220;overhang&#8221; to the left of the saw and a shelf on the other side under the rail extensions&#8230;.hope this is understandable?  BUT NOW THE PROBLEM BEGINS&#8230;..I&#8217;ve misplaced the plan and can&#8217;t seem to find it even using Google!!  Can anyone please tell me where the plan was published?<cite>?</cite>??<br />If you can thanks in advance,<br />John</p>]]>
      </description>
      <pubDate>Sat, 01 Aug 2009 22:51:07 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/10317</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Tape Measure tip</title>
      <link>http://lumberjocks.com/JohnGray/blog/10258</link>
      <description>
        <![CDATA[<p>I was constantly having a problem locating my chrome Stanley tape measure, never could seem to spot it when I needed it.  So I scuffed up the chrome parts with sandpaper, wiped the tape measure down with Prep-Sol (paint thinner will work too), masked off the parts I didn&#8217;t want painted, and gave it a couple coats of bright yellow paint.  Now it stands out from the pack and I seem to never have trouble finding it.</p>]]>
      </description>
      <pubDate>Wed, 29 Jul 2009 15:35:42 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/10258</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Edge Banding Particle Board with Solid Hardwood</title>
      <link>http://lumberjocks.com/JohnGray/blog/9877</link>
      <description>
        <![CDATA[<p>I&#8217;m building an 18&#8221; V-Drum Sander from <a href="http://www.stockroomsupply.com/V_Drum_Sander.php">http://www.stockroomsupply.com/V_Drum_Sander.php</a> Stockroom Supply.  I was given a Particle Board piece to use as a top it&#8217;s laminated with a thin slick veneer top and bottom.  I&#8217;d like to band the edges with Oak that I already cut and mitered.  The question is how to attach the Oak to the Particle Board edges?  I&#8217;m read plenty of horror stories about splitting the Particle Board when using screws and/or nails to attach it.  I was planning on using 18 gauge brads, from an air nailer or pre drilling and using some screws.  Does anyone have experience with a project like this that could help me with my decision?  I was planning on using Titebond.</p>]]>
      </description>
      <pubDate>Thu, 02 Jul 2009 03:37:18 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/9877</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Threat to American Walnut Trees</title>
      <link>http://lumberjocks.com/JohnGray/blog/7944</link>
      <description>
        <![CDATA[<p>Courtesy of Fine Woodworking dot com &#8211; <a href="http://finewoodworking.taunton.com/item/9367/threat-to-american-walnut">http://finewoodworking.taunton.com/item/9367/threat-to-american-walnut</a></p>


	<p>Black walnut trees in the U.S. are facing a serious threat called thousand cankers disease, according to Colorado State University researchers. This recently recognized problem has already devastated black walnut trees west of the Rocky Mountains over the past 10-15 years.</p>


	<p>The disease is caused by a newly discovered fungus that is carried to trees by the walnut twig beetle. A native of the Southwest, the beetle is usually associated with the Arizona walnut tree, to which it is not harmful. It is, however, harmful to the black walnut tree which has been planted extensively throughout the West.</p>


	<p>“The walnut twig beetle has shown a fantastic spread through the western U.S. within the past 25 years,” says Whitney Cranshaw, an entomologist at Colorado State. “In recent years we have seen new records for this insect in Colorado, northern New Mexico, Utah, Idaho, Oregon and Washington. And everywhere we are finding the beetle, all the black walnuts are dying.”</p>


	<p>The bigger concern is if thousand cankers disease moves east where black walnut is a common forest species. “I think thousand cankers disease has the potential to devastate black walnut just as Dutch elm disease nearly wiped out American elms and chestnut blight eliminated the American chestnut,” said Cranshaw. “Right now it is contained west of the Front Range in Colorado and the High Plains provide a good natural barrier, but all it would take is one careless individual moving a walnut log with the beetles and we could have an outbreak that could quickly spiral out of control.”</p>


	<p>Cranshaw emphasizes the importance that foresters, arborists, woodworkers and lumber mills recognize this new threat. They say no walnut logs with bark intact should be allowed to move further east than where the disease is currently known. Walnut lumber and well-dried logs without bark likely pose little threat of carrying the fungus-carrying beetles.</p>


	<p>For more information, please visit www.ext.colostate.edu/pubs/insect/0812_alert.pdf.</p>


	<p><a href="http://finewoodworking.taunton.com/item/9367/threat-to-american-walnut">http://finewoodworking.taunton.com/item/9367/threat-to-american-walnut</a></p>]]>
      </description>
      <pubDate>Wed, 18 Mar 2009 17:39:32 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/7944</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Survey  -  Paper Magazine Subscriptions</title>
      <link>http://lumberjocks.com/JohnGray/blog/7794</link>
      <description>
        <![CDATA[<p>I noted that someone here said something like, &#8220;You know you are a woodworker when your magazine subscriptions total more than a weeks pay&#8221;.<br />I&#8217;ve been getting a lot of magazines lately that are filled with things I already know about, advertising, and several pages of large projects I may never build.  So I&#8217;m making a list of magazines to do away with subscription wise.</p>


	<p><strong>So I&#8217;m asking y&#8217;all WHAT 4 WW MAGAZINES YOU WOULD SUBSCRIBE TO IF YOU COULD GET ONLY FOUR? </strong></p>]]>
      </description>
      <pubDate>Sun, 08 Mar 2009 17:44:53 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/7794</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
    <item>
      <title>Having a Senior Moment....Help?</title>
      <link>http://lumberjocks.com/JohnGray/blog/7291</link>
      <description>
        <![CDATA[<p>I need help finding an article/plan to make a US flag that holds the 50 state quarters.  I saw the article/plan somewhere recently (in the last couple months) don&#8217;t remember what magazine or web site I saw it in/on.  I&#8217;ve looked thru probably 100 magazine back issues, searched in LJ&#8217;s, and Googled it, no luck.  I do remember one thing about it for sure, it said to buy the wooden stars at a craft store.  The flag it&#8217;s self was waved like it would be blowing in the wind and the quarters holes were in the stripes of the flag. <br />Thanks in advance if anyone knows where I can find it,<br />John</p>]]>
      </description>
      <pubDate>Sat, 31 Jan 2009 05:17:55 GMT</pubDate>
      <guid>http://lumberjocks.com/JohnGray/blog/7291</guid>
      <author>John Gray</author>
      <dc:creator>John Gray</dc:creator>
    </item>
  </channel>
</rss>
