LumberJocks

Modine Hot Dawg Programmable Thermostat?

  • Advertise with us
Blog entry by John Gray posted 1671 days ago 8024 reads 0 times favorited 3 comments Add to Favorites Watch

I have a Hot Dawg Heater, HDS 45, installed in my shop and I seem to forget to turn the thermostat down when I leave. Question is, can I install a regular residential set back\programmable thermostat such as found at any BORG? It appears to be a 24V system with 2 wires coming to the thermostat.

Thanks,

John

-- Only the Shadow knows....................



3 comments so far

View lew's profile

lew

9992 posts in 2383 days


#1 posted 1671 days ago

I would think it should work. Most of those set backs are 24v AC with a battery backup. You may even be able to get away with an inexpensive model because there isn’t any need for the “cooling side” function.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Dez's profile

Dez

1113 posts in 2704 days


#2 posted 1671 days ago

Should be able to without too much effort. I used a used one I had laying around in a similar setup.

-- Folly ever comes cloaked in opportunity!

View John Gray's profile

John Gray

2370 posts in 2513 days


#3 posted 1669 days ago

UPDATE – I purchased a Honeywell RTH221B Programmable Thermostat at Menard’s and it works perfectly!!!

-- Only the Shadow knows....................

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase