I purchased the hood shown in the link below.
http://www.pennstateind.com/store/R-TDHOOD.html
And I want to install it on my Ridgid TA3650 saw. Now comes the good part!!! I had a plan to build a unit that incorporates the hood. The unit is 3/4” plywood (2’x4 1/2’ approx.) that bolts between the saw and the stand, you screw the dust hood to the plywood. The plan shows a drawer and shelf using the plywood “overhang” to the left of the saw and a shelf on the other side under the rail extensions….hope this is understandable? BUT NOW THE PROBLEM BEGINS…..I’ve misplaced the plan and can’t seem to find it even using Google!! Can anyone please tell me where the plan was published????
If you can thanks in advance,
John
-- Only the Shadow knows....................
4 comments so far
Tim
home | projects | blog
1292 posts in 1730 days
#1 posted 1385 days ago
Sometimes I will search Google images and get lucky that way.
-- Good judgement comes from experience and experience comes from poor judgement.
John Gray
home | projects | blog
2366 posts in 2051 days
#2 posted 1385 days ago
Thanks Timbo you turned me on to a new source I’m looking now.
-- Only the Shadow knows....................
a1Jim
home | projects | blog
86936 posts in 1743 days
#3 posted 1385 days ago
It seems like I’ve seen one in wood magazine
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
John Gray
home | projects | blog
2366 posts in 2051 days
#4 posted 1385 days ago
Thanks Jim! I finally found it….the article/plan. It is in the ShopNotes “TABLE SAW Essentials Book”, starting on page 76. The book is available at, http://www.woodsmithstore.com/w0851.html. For $10pp.
I’ll try and post a “project” of building it. Should be adaptable to most any contractors saw.
-- Only the Shadow knows....................
Have your say...