LumberJocks

John8059's Blog

  • Advertise with us
This blog is written by John8059 | 13 entries so far

Latest Entry

That was the mistake! - Inlay Banding

1888 days ago by John8059 | 13 comments »

I am finally working on this project again and ran into another problem. You can find out how I got this far from blogs I posted earlier. Last time I showed how I set up guides to cutting the inlay banding grooves. I eventually got all the inlay banding installed, but when I went to sand it flush with the veneer I found I could feel that the resulting surface was uneven. If I could feel it, imagine how bad it was going to look finished! (Keep in mind my hands are trained to feel irregularities after working many years in auto body repair.) I made the banding myself and as careful as I was, the individual pieces (sliced off with a bandsaw) were not a uniform thickness. I trashed t...

Read this entry »

Older Entries

View all 13 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase