LumberJocks

Grinder Sculpting #7: The Finishing Continues

  • Advertise with us
Blog entry by JoeyG posted 930 days ago 1362 reads 1 time favorited 9 comments Add to Favorites Watch
« Part 6: The Finish Begins Part 7 of Grinder Sculpting series Part 8: Time for some fabric »

I decided to go with just the tung oil finish on this one. I may wax and buff it at the end, I’ll wait to see if it needs it or not. I have pictures of the second and third coats here. I gave each coat at least 24 hours to dry then sanded with 400 and then reapplied the finish.

Second coat

Third coat


I don’t know how many coats I will do total, it depends on how it builds. I’ll see ya next time.
Joey

-- JoeyG ~~~ http://www.facebook.com/JHGWoodWorks



9 comments so far

View degoose's profile

degoose

6980 posts in 1958 days


#1 posted 930 days ago

Looking good here…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View jaykaypur's profile

jaykaypur

3257 posts in 1011 days


#2 posted 930 days ago

Great looking finish. Good lustre to it, too!

-- Use it up, Wear it out --------------- Make it do, Or do without!

View JoeyG's profile

JoeyG

1233 posts in 1229 days


#3 posted 930 days ago

Thanks. I hope to have it finished in a couple more days. These finishes can drag out a bit much for my liking but they do look nice when they are done right.

-- JoeyG ~~~ http://www.facebook.com/JHGWoodWorks

View lanwater's profile

lanwater

3075 posts in 1537 days


#4 posted 930 days ago

Looking good!

I can’t wait to see the final coat.

-- Abbas, Castro Valley, CA

View JoeyG's profile

JoeyG

1233 posts in 1229 days


#5 posted 930 days ago

Neither can I Ian. I am ready to ship this one off for consignment.

-- JoeyG ~~~ http://www.facebook.com/JHGWoodWorks

View gfadvm's profile

gfadvm

10599 posts in 1293 days


#6 posted 930 days ago

Very nice.You are joining the ranks of ‘the master box sculptors’. Impatience is what always wrecks my finishes and you’re too far along to wreck this one so be careful.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View vonhagen's profile

vonhagen

483 posts in 968 days


#7 posted 930 days ago

it looks awesum , great job

-- no matter what size job big or small do a job right or don't do it at all.

View vonhagen's profile

vonhagen

483 posts in 968 days


#8 posted 930 days ago

and andy you know that every time i cut corners to speed things up its always disaster, its best to walk away for a bit and just think about it before making hasty decisions that wreck a project, i look at the whole picture then work on it in small sections always keeping in mind how one thing will effect another, kinda like playing chess or in my case checkers cuz i dont know how to play chess.

-- no matter what size job big or small do a job right or don't do it at all.

View abie's profile

abie

588 posts in 2374 days


#9 posted 915 days ago

TNX TNX TNX TNX
I have beenwaiting to see atutorial and you have answered many of my quesations about the tecnique..
many tnanks again.
Bruce retired anf really tired.

-- Bruce. a mind is like a book it is only useful when open.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase