LumberJocks

JayVT's Blog

  • Advertise with us
This blog is written by JayVT | 2 entries so far

Latest Entry

Boat Cradle #1: Strip Boat Cradle

01-09-2012 03:52 AM by JayVT | 1 comment »

The plans for this project are available in a book titled “The Expectant Father’s Cradle Boat Book”.This first picture is of the forms after they were all cut out and mounted to a base.The going is slow only a few inches at a time. The epoxy needs to harden then a few more inches.We covered the edge of the forms with duct tape to keep the strips from sticking to the forms.I also used wax paper to keep the clamps from sticking to the epoxy covered strips.I had to work fast so the epoxy would not cure before I had everything positioned correctly.Lots of staples had to get pulled back out.More epoxy to hold it all together.Sanding and smoothing.Time to pull it off the forms...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com