LumberJocks

Cord Management

  • Advertise with us
Blog entry by Jarred posted 01-16-2015 02:54 AM 903 reads 0 times favorited 0 comments Add to Favorites Watch

Always changing plugs between the lathe, grinder, and lamp. I picked up a three-pronged outlet to secure to the stand. This way I wouldn’t have to change any plugs. I looked for a bracket that would fit around the plug, but couldn’t find anything that fit. I drilled two holes in the webbing between the plugs, and put a screw through each into the back of the lathe stand. A couple of zipties, and the easiest part of the project was done.

The three-way adapter has the nice bonus of a small green LED light to notify when it is plugged in.

Plug in place:

Ziptie:

Plugs in play:

-- My projects are imperfect in every way, just like their creator. Their creator loves them nonetheless, just like mine.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com