I don't have time for this.

  • Advertise with us
This blog is written by Jarred | 7 entries so far

Latest Entry

Cord Management

01-16-2015 02:54 AM by Jarred | 0 comments »

Always changing plugs between the lathe, grinder, and lamp. I picked up a three-pronged outlet to secure to the stand. This way I wouldn’t have to change any plugs. I looked for a bracket that would fit around the plug, but couldn’t find anything that fit. I drilled two holes in the webbing between the plugs, and put a screw through each into the back of the lathe stand. A couple of zipties, and the easiest part of the project was done. The three-way adapter has the nice bonus of a small green LED light to notify when it is plugged in. Plug in place: Ziptie: Plugs in play:

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics