| Blog series by Jamie | updated 1504 days ago | 3 parts | 8203 reads | 29 comments total |
Part 1: Getting this project off to a late start on Lumberjocks
Well, It’s been a long time since I have posted anything on here, and I figured that since I have already started a new project that isn’t complete yet, this would be the perfect time. For the past couple of years, I have been wanting to build a router table ala Norm. Well, my birthday was last friday (March 27) and my wife was asking me what I wanted. Well, long story short, I started out with a couple sheets of 3/4” oak plywood, and a sheet of MDF. This past weekend...
Part 2: Pictures and current progress
Well this one is for Karson. Here are some pics of the new router table currently in construction. This picture is just a view from the front. The top consists of 2 pieces of 3/4” MDF glued together sandwiched between a top and bottom layer of black formica. I have not added the solid oak molding around the table top yet, but it’s ready to go. Probably will happen tomorrow, along with the face frame for the cabinet carcass. The top will be a bit over 25” X 36” ...
Part 3: More progress
Well guys, Once again, an update to the Router table. got quite a bit done today. overall I think it is going to take about 3 – 4 weeks given the time I have in the shop. Enjoy!!! Rear Dust port installed (not permanently yet, still have to put some poly on the finish). The base plate allows me to attach a different port setup if needed like a 90 deg angle, etc.Fence is now partially finished. Installed the braces and dust port with a little glue and 1 1/4” recessed screws...
