| This blog is written by Jamie | 12 entries so far |
-
Router Table #3: More progress
Well guys, Once again, an update to the Router table. got quite a bit done today. overall I thi...
-
Router Table #2: Pictures and current progress
Well this one is for Karson. Here are some pics of the new router table currently in constructio...
-
Router Table #1: Getting this project off to a late start on Lumberjocks
Well, It’s been a long time since I have posted anything on here, and I figured that since...
-
2X4 Winter Contest #3: Bummer... :(
Well, It’s been over 2 weeks since my last post on my 2×4 entry, and it’s also b...
-
Delta T2 Fence #6: How to setup and install on a Craftsman tablesaw
Since I have installed the Delta T2 fence on my Craftsman tablesaw, I have had a few people askin...
-
2X4 Winter Contest #2: Day two - With Pics
Well, So far so good.. The glue has set and now I have a nice 13×18 inch blank to work wit...
-
2X4 Winter Contest #1: The beginning
Well, I started working on my 2×4 project today. Last weekend I picked up a bunch of 2...
-
Delta T2 Fence #5: Before/After Pictures
Here are some pictures of the 1952 Craftsman Tablesaw that I have restored and installed a new De...
-
Delta T2 Fence #4: It's like Ragu!
Last night I drilled the holes in the saw table and the rear rail and mounted it. The result was...
-
Delta T2 Fence #3: The Third Day - Front Rail is Mounted!
As my last post stated, I decided not to return the Delta T2 fence and try to make it fit my old ...
-
Delta T2 Fence #2: A new start, and help with drilling holes in a table saw
Well, I did some measuring on the table saw and the Delta T2 fence, and I may be able to drill 4 ...
-
Delta T2 Fence #1: Bought a new rip fence
Well, I gave in and bought the Delta T2 fence for my restored 1952 Craftsman 10” tilt arbor...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
