LumberJocks

Outfeed Table

  • Advertise with us
Blog series by John's Woodshop updated 04-03-2012 12:44 PM 1 part 3648 reads 6 comments total

Part 1: Prototype

04-03-2012 12:44 PM by John's Woodshop | 6 comments »

Hey all, I had some OSB lying around and I needed an outfeed table for the Vintage Craftsman Cabinet saw that I recently put back into service so I decided to Copy Marc’s Design (The Wood Whisperer). I learned a few things during the prototype build. OSB is not a very suitable material for any kind of bench. It flexes way too much! However, it will be good enough until I can drop the coin on some Plywood to build the permanent one. Here she is: Any suggestions for the...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase