LumberJocks

JTTHECLOCKMAN's Forum Topics

  • Advertise with us
View JTTHECLOCKMAN's:homeworkshopprojects (19)blog (0)reviews (0)forum topics (25)buddies (0)favorites (0)activity logWatch
675 days ago

Dymondwood or colorply wood - 1 reply

I am looking for a supplier of turning stock of Dymondwood or colorply wood. I used to get it through Hut Products but they do not carry the black on black any more. It has to be at least 2” by 2” by ?? long. Anyone with a lead? Thanks

714 days ago

Cutting angled pieces - 6 replies

Not really staves but I am looking for a safe and true way of cutting pieces about 8 to 10” long on a tablesaw. I want to be able to use either 4 or 6 or 8 pieces to make a cylinder. So what I am looking to do is cut lengths of wood with both sides with the appropriate angles. Not sure what they call these but they would look like a stave ...

788 days ago

Small End table - 1 reply

I am looking to build a small end table. I would like to have 2 shelves. Looking for photos of ones that people have done in the past. Also looking for any plans if possible. It can be 3 legged or 4 legged but can not protrude too much because it will be in a walk path. It will only have some knick-knacks and flowers on it. Any help would be app...

917 days ago

Wood Bleach - 3 replies

I will need to bleach alot of wood in the near future and was wonder would Clorox bleach for clothes do the same thing as 2 part wood bleach? If anyone has done this, what are the dos and don’t and pros and cons? If not does anyone knoe where I can buy wood bleach for a reasoonable price?? Thanks in advance.

939 days ago

Looking for a Sphere turning jig - 3 replies

I am wanting to give sphere turning on a lathe a try. I looked at the commercial jigs out there and they are too expensive. I tried doing by hand but not too successful. I am looking for a plan to make a homemade jig of some sort. Does anyone have any links to a site where I can see. Or if you have done one do you have any photos??? Thanks in a...

943 days ago

Have to seee it to believe it - 17 replies

This would come under woodworking skills. I bet this will blow your mind because it did mine. Amazing, fantastic and unbelievable are some words that come to mind seeing this. Enjoy and the next time you sweep those wood chips up think of this fella. http://www.designswan.com/archives/incredible-wooden-chip-artwork-by-sergey-bobkov.html

1299 days ago

Looking for a Book - 4 replies

Does anyone have this book they are willing to sell or does anyone know where i can get this book for a reasonable price??? Thanks “Laminated Designs in Wood.” by Clarence Rannefeld

1303 days ago

Festool - 10 replies

OK I am looking to step up and bite the bullet. Have some extra tool money. I want to buy a Festool miter saw and a vac to go with it. Where should I buy it to get the best price if there is such a thing??? I am figuring they are priced at one price and that is it but please prove me wrong and point the way. I am getting ino segmenting turning ...

1313 days ago

Has Anyone Tried??? - 4 replies

I seen this for the first time today and think the idea is very interesting and could possibly work well. Has anyone tried these and if so what are your thoughts??? http://www.finalcutblade.com/

1327 days ago

LOGOS - 4 replies

How many here use a logo for their websites or business cards or whatever. If so how did you get it? Did you do it yourself or have a professional do it Did you use a service?? I am looking to get a logo made for use on my web site as well as business cards and possibly shirts and things. I am a woodworker of all sorts but my main interests a...

1334 days ago

Web Sites - 15 replies

Who has a web site? I am looking to get a web site up. Any suggestions for some good ones and why do you think it is good? Is it a free or what is the fee??? I have no idea what I am doing so this will be a huge learning thing. I tried getting Serif WebPlusX4 software and had to send it back because it is not compatible with my system which i...

1360 days ago

Web site opinions - 4 replies

Are web sites needed to sell our wares? Do you use a web site and if so how are you doing with it? Did you make it yourself? Do you have any recomendations? Do you sell through other avenues and have you been successful??? Thanks.

1514 days ago

Portable Generators - 1 reply

I tried putting this in the coffe lounge but something is wrong there. This could apply to woodworking tools so this is a good place for this also. Thanks for the replys. Started looking into getting a portable generator for the occassional power outage in my area. I have seen power outages here anywhere from 1/2 hour to 3 days. The more I lo...

1514 days ago

Portable Generators - 5 replies

Started looking into getting a portable generator for the occassional power outage in my area. I have seen power outages here anywhere from 1/2 hour to 3 days. The more I look the more I am unsure what to get. I looked at Honda because of the reputation of being reliable and quiet. I started looking at the Handi3000watt unit and was told this is...

1525 days ago

Shadow box - 2 replies

I have a ranch house that has a main hall way that is pretty long and was thinking of dressing this up with a shadow box built in the wall. Has anyone done this and what are your opinions? Does anyone have any photos? Now the wall I am thinking about is basically a side wall. I can’t put it at the end of the hall because 2 bedrooms branc...

1537 days ago

portable quiet room fan??? - 5 replies

I am looking for a portable reliable and quiet room fan. With quiet being the key word. Any suggestions and where did you get it???

1617 days ago

Looking for a Generator - 3 replies

Just this past weekend the east coast and in particular here in NJ we had a very bad storm that caused much water damage and wind damage. Although I did not lose power this time I got to thinking if I lost power like so many of my neighboring towns I would have taken on alot of water in my basement. As it was I had to add another sump pump to ke...

1647 days ago

Powder Coating ??? - 6 replies

For those that use a powdercoating system, I have a question. Do you use alot of different colors and if so how do you clean the equipment to prevent cross contamination??? Thanks.

1669 days ago

Compass Rose - 6 replies

I am looking to make a compass rose but I want a 3d overlay look and not an inlay such as in marquetry. I was wondering does anyone have any simple instructions of doing this? what tools are needed to cut it Any photos would be a help. Am I looking at a difficult project??? Thanks.

1686 days ago

Recalls - 1 reply

In one of my latest woodworking magazines they have a few tools that are being recalled for various reasons. Some may already know of these or have gotten recall notices. But I see often people asking about new tools for their purchase so this may be of interest. Grizzly metal/wood 17” bandsaw model#G0640X Ridgid 10” Tablesaw m...

1 2 next »
25 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase