LumberJocks

Jason™'s Favorites

  • Advertise with us
View BritBoxmaker's profile

The EZ mitre technique

07-26-2010 10:55 PM by BritBoxmaker | 74 comments »

Hello all. Well I seem to have whet the appetite a bit so here goes for a ‘novel’ technique for making mitred boxes. Its a bit like making a box out of paper, like they showed you at school, using a ‘net’. Only in 3D, with wood and a tablesaw (not sissors). Well first comes the board Its made from alternating strips of Maple and Rosewood of varying thickness. I won’t bore you with the details on how to make it suffice to say that all the corners must b...

Read this entry »


View gizmodyne's profile

Shop Organization #7: Crosscut Sled version 2.0 and Panel Sled

02-19-2008 06:56 AM by gizmodyne | 11 comments »

With the new saw I have needed to make a new crosscut sled. I have been struggling with cutting large plywood panels so I also decided to make a panel cutting sled based on Norm's design Panel Sled I started by planing some white oak to fit in the miter slots. The runners are set just below the table surface. I attached the runner to a 3 foot run of plywood…. .... and ran the ply through the saw. I attached a fence to the back of the sled square to the cut edge. It...

Read this entry »


View Greg Wurst's profile

Table Saw Mobile Workstation #1: I love it when a plan comes together...

04-21-2008 11:00 PM by Greg Wurst | 21 comments »

Awhile back Wood Magazine had an article on building a mobile outfeed table that would fit over your table saw. Since I need all the space in my garage I can get, I went ahead and built one that would fit over my table saw to give me some much needed work space and a handy outfeed table. I thought this was pretty spiffy and a great use of space. As I always do I look at the latest project posts on Lumberjocks looking for inspiration for my next project. Whilst browsing I came ac...

Read this entry »


View Greg Wurst's profile

Table Saw Mobile Workstation #2: Measuring, Cutting Diagrams, and Material Lists

04-23-2008 10:32 PM by Greg Wurst | 8 comments »

Well, now that I’m fairly comfortable with the layout and construction of the cabinet it was time to tear things apart and get some actual measurements and formulate a material list and plan of attack (much easier to tear virtual cabinets apart!). After saving the Sketchup plan as another file I start removing unnecessary and duplicate items and start putting-in some dimensions. The pictures should show most if not all of the dimensions I used, but I can’t say for sure since I...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase