| Blog series by Jason™ | updated 245 days ago | 3 parts | 2439 reads | 39 comments total |
Part 1: First ??? "Glue Lines"
Here goes my first of many and I do mean many….. Glue Lines It seems to be hard for me to get my glue lines to disappear. I sand and sand trying to get them to go away but can’t seem to eliminate them. The mallet I made, on the top where I put in my splines it looked great at first but then the next day I came to see my dried glue item. They are very faint but can still be seen until I put few coats polyurethane. I noticed some black marks also but this may be from the ch...
Part 2: Beginner Questionaire for JN1C3 #2:
So I went back to my local woodworking place where they make cabinet, built ins and such. Dug through there scrap pile and got a few more pieces of wood. The question here is quite a simple nobish type one. Though may not be able to be answered due to my poor 5 mp camera. I would like to know what this wood is in the pics below 1. 2. Possibly the same as above 3. Might be too small to actually tell on this one due to poor camera quality.These were the only ones that I cut and they...
Part 3: Sizing down Plywood
Hello again everyone I would like to ask another question on here since all the previous ones I have asked were answered and now I understand what I was doing wrong or what the case was. I am currently gathering materials needed to build a TableSaw Workstation that can be seen in the Shopnotes issue #89 The question for this series is what are some of your ways of cutting down large sheets of plywood or MDF and getting them squared up?? “Using a Benchtop size Table saw” I D...
