Once I made the pieces for the frame , it was time to start making different cuts. Mortise and tennon cuts should be made for each leg. These holes will allow the frame to fit into the legs. Also the tops of the legs were cut. The thickness that the holes on top of the legs should be the thickness of the ends of the top pieces of the bracket for the table itself. The two cut ends will fit together so the ends of the frame pieces will sit on top of the leg cuts.
|Blog entry by JLay||posted 04-20-2015 06:02 PM||617 reads||0 times favorited||0 comments|
|« Part 1: Coffee Table Part 1||Part 2 of Coffee Table series||Part 3: Coffee table #3 »|