LumberJocks

Jorge G.'s Favorites

  • Advertise with us
View kaerlighedsbamsen's profile

Wegner inspired dining chair #1: Getting inspired & first test

07-10-2014 08:26 PM by kaerlighedsbamsen | 6 comments »

I have always admired wegners furniture. Especially his chairs. They are so “final” designs. Nothing to improve, nothing to remove. Just right. For a long time a have known that one day i wanted to build something in his style. But as simple they look his furniture is nothing but simple to make. And i felt that i needed a certain level of skill to give it a try. The past two years i have built a lot of projects and tried to raise the difficult level a little each time.Last week...

Read this entry »


View WoodAndShop's profile

10 Steps to Getting Started in Traditional Woodworking with Hand Tools #2: |Step 1| Understand & Buy the Right Hand Tools

04-15-2014 03:01 PM by WoodAndShop | 6 comments »

1.1 Which Hand Tools Do You Need? After woodworking for several years, conducting “research”, and attending Roy Underhill’s Woodwright’s School, I’ve compiled three lists of hand tools: (1) urgent (what you need to get started), (2) semi-urgent (what you need to do more than just basic projects), and (3) non-urgent (improves convenience, tools for advanced projects, or items that are fun to have, but not vital). Used vintage hand tools are better in most cases (and less expensive), alth...

Read this entry »


View shipwright's profile (online now)

Creating Oops! tutorial

10-02-2010 06:33 PM by shipwright | 13 comments »

Oops! began as an idea about outside the box hinges. I’ve always liked the “box on stand” idea but had never tried one so that sort of fell into place and one of the first ideas I had about box decoration was a “spill” pattern. I sketched these on a bit of paper at the kitchen table one day and it was left there. Last December I restored an old ShopSmith 10 ER and had been wanting to see how good a tool it really was and what kind of precision I could achieve...

Read this entry »


View GarageWoodworks's profile

Make a Jointer Knife Setting Jig

10-17-2013 06:16 PM by GarageWoodworks | 7 comments »

How to make and use a jointer knife setting jig. Can be made from scrap in a couple hours. Video contains one of my most complex effects to date: video matte and stop motion combined (for the video geeks). VIDEO

Read this entry »


View Brit's profile

Saw Talk #28: Sharpening Western Saws - Full Length Instructional Video

06-04-2013 01:03 AM by Brit | 107 comments »

Aimed at those new to saw sharpening, this instructional video is 2 1/4 hours long and covers the theory, the tools and the practice of sharpening western saws. You get to look over my shoulder as I sharpen four saws – two backsaws and two hand saws. I’ll explain the saw sharpening process and how you apply it to different scenarios. I really hope you find it useful. As to the production quality, I’ve done the best I could. I had to record it outside, so there is a bi...

Read this entry »


View Mark Shymanski's profile

what is 360 divided by 10, anyone, anyone...

07-06-2013 10:38 PM by Mark Shymanski | 9 comments »

If you don’t remember the teacher from ‘Ferris Beuhler’s Day Off’ the title is not at all funny, it’s barely funny if you do remember the movie:-) Anyway, I got a chance to work on the birdsmouth joints Paul ( Shipwright) recommended for making my hollow mast prototype. Once I’d fabricated a zero clearance dado blade insert I did a couple of test cuts and then ran my 10 boards through for my trial glue up.I had cut a pronounced taper on the boards figuri...

Read this entry »


View huff's profile

How to price my woodworking (and sell it) #1: How to price your woodworking to make a profit (and sell it)

05-30-2013 10:25 PM by huff | 22 comments »

How to price my woodworking?(And sell it) Part 1 So where do you begin to answer such a simple question; or is it that simple? I’ve heard this question asked so many times and I’ve heard so many one liner’s for an answer:• “Know your market”• “You can only sell it for what the market will bear”.• “I sell it for enough to support my hobby” • “It’s just a hobby, so what does it matter as long as you at least cover your material cost”.• Cost of materials x 2.• Cost of...

Read this entry »


View Greg..the Cajun  Box Sculptor's profile

Words of Wisdom For Woodworkers

02-04-2011 10:23 PM by Greg..the Cajun Box Sculptor | 15 comments »

� Do not argue with an idiot; he will drag you down to his level and beat you with experience. � Going to church doesn’t make you a Christian any more than standing in a garage makes you a car. � The last thing I want to do is hurt you; But it’s still on the list. � Light travels faster than sound. This is why some people appear bright until you hear them speak. � If I agreed with you we’d both be wrong. � We never really grow up, we only lea...

Read this entry »


View Andy's profile

"Art Box" Tutorial #1: Intro

06-16-2009 03:49 PM by Andy | 37 comments »

Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...

Read this entry »


View dakremer's profile

Creative Woodworking #42: Is this even possible??? (expanding table)

12-20-2012 05:55 AM by dakremer | 14 comments »

Can anyone figure out how this works????? see it here in action….. Read more about it here

Read this entry »


1 2 3 next »
24 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase